FASTENERS RIGHT NOW Trademark

Trademark Overview


On Tuesday, December 15, 2009, a trademark application was filed for FASTENERS RIGHT NOW with the United States Patent and Trademark Office. The USPTO has given the FASTENERS RIGHT NOW trademark a serial number of 77893614. The federal status of this trademark filing is CANCELLED - SECTION 8 as of Monday, January 18, 2021. This trademark is owned by Spaenaur Inc.. The FASTENERS RIGHT NOW trademark is filed in the Metal Products, Hand Tool Products, Computer & Software Products & Electrical & Scientific Products, Rubber Products, and Furniture Products categories with the following description:

Metal industrial hardware and fasteners, namely, bolts, nuts, anchors, lock nuts, metal welding rods and metal threaded rods, metal brackets for general use, clamps, metal clamp-type fasteners, namely, adjustable diameter metal clamps for stationary binding of hoses, wires and tubes, door handles, snap catches and metal cabinet door catches, quarter turn screws that lock after a quarter turn, locks, latches, hinges; metal door and toolbox hardware, namely, hasps; metal hardware for use in vehicles, namely, grease fittings; structural fasteners, namely, insert fasteners for sandwich structures; metal self-tapping bushings, metal strain relief bushings for wire and cable; metal hardware, namely, grommets and washers; woodruff keys and machine keys, metal knobs, metal locking knob springs, nails; metal pins, namely, metal cotter pins, metal dowel pins, metal hitch pins, metal coiled spring pins, metal clevis pins and metal groove pins; metal plug buttons for screw holes, metal plugs; meta...

hand tools, namely, pop riveters; hand tools, namely, nut and screw drivers and interchangeable nut and screw head bits therefor; pliers; hand operated cutting tools; hand tools, namely, hex key wrenches and hex key wrench sets comprising multiple hex key wrenches of different sizes; hand tools, namely, nut drivers; hand operated pry bars for removal of speed nuts; hand operated tools for the insertion of speed nuts; hand tools, namely, punches; hand operated retaining ring applicators; hand tools, namely, retaining ring pliers; hand operated clamping tools for joining banded material, such as metal strapping, together; clamping bushings; locking cable tie tools, namely, pliers and cutters; wiring terminal tools, namely, crimpers, wire cutters, pliers and wire strippers; hand operated tools for positioning weatherstripping materials within channels; hand operated grommet tools for inserting and connecting grommets into sheet materials of fabric, canvas and vinyl; hand tools, namely, gr...

magnets; electrical hardware, namely, electrical terminal blocks, electrical connectors, electrical connector housings; calipers, namely, pocket calipers and slide calipers for measuring; feeler gauges for measuring the thickness of gaps between industrial materials and thread pitch gauges for measuring the size of threads on industrial fasteners; and ring sizers

adhesive tape for industrial and commercial use; rubber anti-vibration pads; plastic and rubber caps for industrial containers; sealing plugs made primarily from rubber; molded rubber bumpers used as non-skid friction devices which act as pads, cushions or shock absorbers for chair legs, doors and drawers; rubber grommets for insulation and shock absorption not for use with vehicles; rubber bottle stoppers; extruded semi-finished goods made of synthetic materials in the form of hoses and seals for industrial, construction and agricultural use; plastic, silicone and rubber weatherstripping for use in automobiles, air hoses, buildings and homes; non-metal seals, namely, o-rings for use with fluid power and industrial applications; rubber sealing plugs, namely, rubber plug bumpers for holes

plastic caps and plastic dowel plugs for plugging holes; plastic storage containers, namely, storage cabinets, storage drawers, storage racks, and cabinets for holding first aid supplies; non-metal fasteners, namely, rivets; non-metal screws and plastic fastening screw anchors; non-metal shims; non-metal furniture parts, namely, drawer and chair glides; non-metal upholstery tacks; non-metal fastening anchors; plastic, silicone and rubber door trims, drawer trims and window trims; rubber tips for furniture and stool legs; plastic suction cups not for medical purposes; non-metal hollow wall and solid wall fastening anchors; plastic, silicone and rubber lawn and landscaping edging; plastic knobs

General Information


Serial Number77893614
Word MarkFASTENERS RIGHT NOW
Filing DateTuesday, December 15, 2009
Status710 - CANCELLED - SECTION 8
Status DateMonday, January 18, 2021
Registration Number4556134
Registration DateTuesday, June 24, 2014
Mark Drawing4000 - Illustration: Drawing with word(s) / letter(s) / number(s) in Block form
Published for Opposition DateTuesday, January 10, 2012
Attorney NameJames L. Young
Law Office Location CodeL30
Employee NameRICHARDS, SUSAN ANN
CorrespondentJames L. Young
Westman, Champlin & Koehler P.A.
121 South Eighth Street, Suite 1100
Minneapolis MN 55402

Trademark Statements


Disclaimer with Predetermined Text"FASTENERS"
Goods and ServicesMetal industrial hardware and fasteners, namely, bolts, nuts, anchors, lock nuts, metal welding rods and metal threaded rods, metal brackets for general use, clamps, metal clamp-type fasteners, namely, adjustable diameter metal clamps for stationary binding of hoses, wires and tubes, door handles, snap catches and metal cabinet door catches, quarter turn screws that lock after a quarter turn, locks, latches, hinges; metal door and toolbox hardware, namely, hasps; metal hardware for use in vehicles, namely, grease fittings; structural fasteners, namely, insert fasteners for sandwich structures; metal self-tapping bushings, metal strain relief bushings for wire and cable; metal hardware, namely, grommets and washers; woodruff keys and machine keys, metal knobs, metal locking knob springs, nails; metal pins, namely, metal cotter pins, metal dowel pins, metal hitch pins, metal coiled spring pins, metal clevis pins and metal groove pins; metal plug buttons for screw holes, metal plugs; metal hardware, namely, snap rings; metal rivets, metal rivet caps for split and tubular rivets; metal screws, metal screw anchors; metal shims, metal spacer brackets; metal hardware, namely, springs; metal bolt snaps; metal hooks; wire rope fittings of metal, namely, metal threaded studs; metal fasteners, namely, stand-offs; metal upholstery tacks, snap hooks and buttons; metal threaded fasteners, namely, double-sided threaded bolts; cable thimbles of metal; metal washers for distributing fastener load, wire; cast materials, namely, continuous cast steel rounds; retractable metal folding individual steps for securement to a vertical surface. metal sealing, gasket and key rings, metal handles for doors and cabinets; metal marine hardware, namely, buckles, dock cleats, hooks, metal fastening rings, metal snap fasteners and press-studs having a pair of interlocking discs; metal upholstery and furniture hardware and supplies, namely, metal snap fasteners and press-studs having a pair of interlocking discs, metal fastening rings, metal upholstery tacks, drawer and chair glides, chair swivel plates, metal hooks; buckles of common metal; metal furniture parts, namely, drawer and chair slides; storage containers, namely, general purpose metal storage bins; truck and trailer refrigeration hardware, namely, metal refrigerator locks; metal hollow wall and solid wall fastening anchors
Goods and Serviceshand tools, namely, pop riveters; hand tools, namely, nut and screw drivers and interchangeable nut and screw head bits therefor; pliers; hand operated cutting tools; hand tools, namely, hex key wrenches and hex key wrench sets comprising multiple hex key wrenches of different sizes; hand tools, namely, nut drivers; hand operated pry bars for removal of speed nuts; hand operated tools for the insertion of speed nuts; hand tools, namely, punches; hand operated retaining ring applicators; hand tools, namely, retaining ring pliers; hand operated clamping tools for joining banded material, such as metal strapping, together; clamping bushings; locking cable tie tools, namely, pliers and cutters; wiring terminal tools, namely, crimpers, wire cutters, pliers and wire strippers; hand operated tools for positioning weatherstripping materials within channels; hand operated grommet tools for inserting and connecting grommets into sheet materials of fabric, canvas and vinyl; hand tools, namely, grommet dies and hole punches; hand operated staple removers; chisels; hand tools, namely, hand tools for removing tacks; hand operated upholstery spring benders and webbing stretchers; shears; hand operated cutting tools, namely, wire cutters, sheet metal cutters and bolt cutters; scissors; hand tools, namely, awls; hand tools, namely, cushion clip pliers; hand tools, namely, hammers; split ring pliers; hand tools, namely, drills; hand tools, namely, tap and die sets; manually operated pneumatic grease gun accessories, namely, grease fittings; hand tools, namely, hex key wrenches and allen wrenches; hand tools, namely, gib-head wrenches for holding pulleys and gears tightly on a shaft
Goods and Servicesmagnets; electrical hardware, namely, electrical terminal blocks, electrical connectors, electrical connector housings; calipers, namely, pocket calipers and slide calipers for measuring; feeler gauges for measuring the thickness of gaps between industrial materials and thread pitch gauges for measuring the size of threads on industrial fasteners; and ring sizers
Goods and Servicesadhesive tape for industrial and commercial use; rubber anti-vibration pads; plastic and rubber caps for industrial containers; sealing plugs made primarily from rubber; molded rubber bumpers used as non-skid friction devices which act as pads, cushions or shock absorbers for chair legs, doors and drawers; rubber grommets for insulation and shock absorption not for use with vehicles; rubber bottle stoppers; extruded semi-finished goods made of synthetic materials in the form of hoses and seals for industrial, construction and agricultural use; plastic, silicone and rubber weatherstripping for use in automobiles, air hoses, buildings and homes; non-metal seals, namely, o-rings for use with fluid power and industrial applications; rubber sealing plugs, namely, rubber plug bumpers for holes
Goods and Servicesplastic caps and plastic dowel plugs for plugging holes; plastic storage containers, namely, storage cabinets, storage drawers, storage racks, and cabinets for holding first aid supplies; non-metal fasteners, namely, rivets; non-metal screws and plastic fastening screw anchors; non-metal shims; non-metal furniture parts, namely, drawer and chair glides; non-metal upholstery tacks; non-metal fastening anchors; plastic, silicone and rubber door trims, drawer trims and window trims; rubber tips for furniture and stool legs; plastic suction cups not for medical purposes; non-metal hollow wall and solid wall fastening anchors; plastic, silicone and rubber lawn and landscaping edging; plastic knobs

Classification Information


International Class006 - Common metals and their alloys; metal building materials; transportable buildings of metal; materials of metal for railway tracks; nonelectric cables and wires of common metal; ironmongery, small items of metal hardware; pipes and tubes of metal; safes; goods of common metal not included in other classes; ores.
US Class Codes002, 012, 013, 014, 023, 025, 050
Class Status Code2 - Sec. 8 - Entire Registration
Class Status DateMonday, January 18, 2021
Primary Code006
First Use Anywhere DateSaturday, September 1, 2012
First Use In Commerce DateWednesday, March 6, 2013

International Class008 - Hand tools and implements (hand-operated); cutlery; side arms; razors.
US Class Codes023, 028, 044
Class Status Code2 - Sec. 8 - Entire Registration
Class Status DateMonday, January 18, 2021
Primary Code008
First Use Anywhere DateSaturday, September 1, 2012
First Use In Commerce DateWednesday, March 6, 2013

International Class009 - Scientific, nautical, surveying, photographic, cinematographic, optical, weighing, measuring, signalling, checking (supervision), life-saving and teaching apparatus and instruments; apparatus and instruments for conducting, switching, transforming, accumulating, regulating or controlling electricity; apparatus for recording, transmission or reproduction of sound or images; magnetic data carriers, recording discs; automatic vending machines and mechanisms for coin operated apparatus; cash registers, calculating machines, data processing equipment and computers; fire extinguishing apparatus.
US Class Codes021, 023, 026, 036, 038
Class Status Code2 - Sec. 8 - Entire Registration
Class Status DateMonday, January 18, 2021
Primary Code009
First Use Anywhere DateSaturday, September 1, 2012
First Use In Commerce DateWednesday, March 6, 2013

International Class017 - Rubber, gutta-percha, gum, asbestos, mica and goods made from these materials and not included in other classes; plastics in extruded form for use in manufacture; packing, stopping and insulating materials; flexible pipes, not of metal.
US Class Codes001, 005, 012, 013, 035, 050
Class Status Code2 - Sec. 8 - Entire Registration
Class Status DateMonday, January 18, 2021
Primary Code017
First Use Anywhere DateSaturday, September 1, 2012
First Use In Commerce DateWednesday, March 6, 2013

International Class020 - Furniture, mirrors, picture frames; goods (not included in other classes) of wood, cork, reed, cane, wicker, horn, bone, ivory, whalebone, shell, amber, mother-of-pearl, meerschaum and substitutes for all these materials, or of plastics.
US Class Codes002, 013, 022, 025, 032, 050
Class Status Code2 - Sec. 8 - Entire Registration
Class Status DateMonday, January 18, 2021
Primary Code020
First Use Anywhere DateSaturday, September 1, 2012
First Use In Commerce DateWednesday, March 6, 2013

Trademark Owner History


Party NameSpaenaur Inc.
Party Type30 - Original Registrant
Legal Entity Type03 - Corporation
Address815 Victoria Street North
Kitchener N2G4B1
CA

Party NameSpaenaur Inc.
Party Type20 - Owner at Publication
Legal Entity Type03 - Corporation
Address815 Victoria Street North
Kitchener N2G4B1
CA

Party NameSpaenaur Inc.
Party Type10 - Original Applicant
Legal Entity Type03 - Corporation
Address815 Victoria Street North
Kitchener N2G4B1
CA

Trademark Events


Event DateEvent Description
Tuesday, January 19, 2021NOTICE OF CANCELLATION SEC. 8 EMAILED
Monday, January 18, 2021CANCELLED SEC. 8 (6-YR)
Wednesday, July 8, 2020POST REGISTRATION ACTION MAILED - SEC. 8 & 15
Wednesday, July 8, 2020CASE ASSIGNED TO POST REGISTRATION PARALEGAL
Wednesday, June 24, 2020TEAS SECTION 8 & 15 RECEIVED
Friday, June 19, 2020REVIEW OF CORRESPONDENCE COMPLETE - ADDRESS UPDATED
Monday, May 25, 2020APPLICANT/CORRESPONDENCE CHANGES (NON-RESPONSIVE) ENTERED
Monday, May 25, 2020TEAS CHANGE OF CORRESPONDENCE RECEIVED
Monday, May 25, 2020TEAS CHANGE OF DOMESTIC REPRESENTATIVES ADDRESS
Monday, May 25, 2020TEAS WITHDRAWAL OF ATTORNEY RECEIVED-FIRM RETAINS
Monday, May 25, 2020ATTORNEY/DOM.REP.REVOKED AND/OR APPOINTED
Monday, May 25, 2020TEAS REVOKE/APP/CHANGE ADDR OF ATTY/DOM REP RECEIVED
Monday, May 25, 2020TEAS CHANGE OF OWNER ADDRESS RECEIVED
Monday, June 24, 2019COURTESY REMINDER - SEC. 8 (6-YR) E-MAILED
Tuesday, June 24, 2014REGISTERED-PRINCIPAL REGISTER
Tuesday, May 20, 2014NOTICE OF ACCEPTANCE OF STATEMENT OF USE E-MAILED
Monday, May 19, 2014LAW OFFICE REGISTRATION REVIEW COMPLETED
Thursday, May 15, 2014ALLOWED PRINCIPAL REGISTER - SOU ACCEPTED
Friday, April 18, 2014EXAMINER'S AMENDMENT ENTERED
Friday, April 18, 2014NOTIFICATION OF EXAMINERS AMENDMENT E-MAILED
Friday, April 18, 2014EXAMINERS AMENDMENT E-MAILED
Friday, April 18, 2014SU-EXAMINER'S AMENDMENT WRITTEN
Monday, April 14, 2014NOTICE OF REVIVAL - E-MAILED
Monday, April 14, 2014TEAS/EMAIL CORRESPONDENCE ENTERED
Monday, April 14, 2014CORRESPONDENCE RECEIVED IN LAW OFFICE
Monday, April 14, 2014PETITION GRANTED - RESPONSE RECEIVED
Thursday, April 10, 2014TEAS RESPONSE TO PETITION DEFICIENCY RECEIVED
Thursday, April 10, 2014INCOMPLETE PETITION NOTICE MAILED
Wednesday, April 9, 2014TEAS RESPONSE TO PETITION DEFICIENCY RECEIVED
Tuesday, March 11, 2014INCOMPLETE PETITION NOTICE MAILED
Tuesday, March 11, 2014ASSIGNED TO PETITION STAFF
Monday, March 10, 2014TEAS DUE DILIGENCE PETITION RECEIVED
Tuesday, December 31, 2013ABANDONMENT NOTICE MAILED - FAILURE TO RESPOND
Tuesday, December 31, 2013ABANDONMENT - FAILURE TO RESPOND OR LATE RESPONSE
Thursday, April 18, 2013NOTIFICATION OF NON-FINAL ACTION E-MAILED
Thursday, April 18, 2013NON-FINAL ACTION E-MAILED
Thursday, April 18, 2013SU - NON-FINAL ACTION - WRITTEN
Wednesday, March 27, 2013STATEMENT OF USE PROCESSING COMPLETE
Wednesday, March 6, 2013USE AMENDMENT FILED
Tuesday, March 26, 2013CASE ASSIGNED TO INTENT TO USE PARALEGAL
Wednesday, March 6, 2013TEAS STATEMENT OF USE RECEIVED
Saturday, December 8, 2012NOTICE OF APPROVAL OF EXTENSION REQUEST E-MAILED
Friday, December 7, 2012EXTENSION 1 GRANTED
Thursday, September 6, 2012EXTENSION 1 FILED
Thursday, December 6, 2012CASE ASSIGNED TO INTENT TO USE PARALEGAL
Wednesday, December 5, 2012NOTICE OF REVIVAL - E-MAILED
Wednesday, December 5, 2012EXTENSION RECEIVED WITH TEAS PETITION
Wednesday, December 5, 2012PETITION TO REVIVE-GRANTED
Wednesday, December 5, 2012TEAS PETITION TO REVIVE RECEIVED
Tuesday, October 9, 2012ABANDONMENT NOTICE MAILED - NO USE STATEMENT FILED
Monday, October 8, 2012ABANDONMENT - NO USE STATEMENT FILED
Tuesday, March 6, 2012NOA E-MAILED - SOU REQUIRED FROM APPLICANT
Tuesday, January 10, 2012OFFICIAL GAZETTE PUBLICATION CONFIRMATION E-MAILED
Tuesday, January 10, 2012PUBLISHED FOR OPPOSITION
Wednesday, December 21, 2011NOTIFICATION OF NOTICE OF PUBLICATION E-MAILED
Tuesday, December 6, 2011LAW OFFICE PUBLICATION REVIEW COMPLETED
Tuesday, December 6, 2011APPROVED FOR PUB - PRINCIPAL REGISTER
Wednesday, November 16, 2011TEAS/EMAIL CORRESPONDENCE ENTERED
Wednesday, November 16, 2011CORRESPONDENCE RECEIVED IN LAW OFFICE
Thursday, November 3, 2011TEAS REQUEST FOR RECONSIDERATION RECEIVED
Friday, June 3, 2011NOTIFICATION OF FINAL REFUSAL EMAILED
Friday, June 3, 2011FINAL REFUSAL E-MAILED
Friday, June 3, 2011FINAL REFUSAL WRITTEN
Saturday, May 7, 2011TEAS/EMAIL CORRESPONDENCE ENTERED
Friday, May 6, 2011CORRESPONDENCE RECEIVED IN LAW OFFICE
Friday, May 6, 2011TEAS RESPONSE TO OFFICE ACTION RECEIVED
Thursday, January 20, 2011TEAS CHANGE OF CORRESPONDENCE RECEIVED
Saturday, November 6, 2010NOTIFICATION OF NON-FINAL ACTION E-MAILED
Saturday, November 6, 2010NON-FINAL ACTION E-MAILED
Saturday, November 6, 2010NON-FINAL ACTION WRITTEN
Friday, September 24, 2010TEAS/EMAIL CORRESPONDENCE ENTERED
Thursday, September 23, 2010CORRESPONDENCE RECEIVED IN LAW OFFICE
Friday, September 24, 2010TEAS/EMAIL CORRESPONDENCE ENTERED
Friday, September 24, 2010CORRESPONDENCE RECEIVED IN LAW OFFICE
Thursday, September 23, 2010TEAS RESPONSE TO OFFICE ACTION RECEIVED
Wednesday, September 22, 2010APPLICANT/CORRESPONDENCE CHANGES (NON-RESPONSIVE) ENTERED
Wednesday, September 22, 2010ASSIGNED TO LIE
Thursday, September 9, 2010PAPER RECEIVED
Tuesday, March 23, 2010NOTIFICATION OF NON-FINAL ACTION E-MAILED
Tuesday, March 23, 2010NON-FINAL ACTION E-MAILED
Tuesday, March 23, 2010NON-FINAL ACTION WRITTEN
Tuesday, March 16, 2010ASSIGNED TO EXAMINER
Wednesday, December 23, 2009NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM
Friday, December 18, 2009NEW APPLICATION ENTERED IN TRAM